Home Categories Send inquiry

News

Customized machine system

Taiwan MSW Garbage shredder and Fuel bar pelletizing dryer system   Raw Material Final Material Capacity 1000kg/h Final moisture About 3% Machine System Shredder system + 1000KG/H Fuel bar pelletizing dryer Power consumption About 170kw How to Work ... Read More

Infrared crystal dryer for PET/Polyester colour masterbatch

The Infrared crystallization dryer for PET Masterbatch running in Suzhou customer’s Factory   Cutomer’s Key problem by using Conventional Dryer as follows Drum dryer                                                                 Oven                                                Hot a... Read More

Infrared dryer for PET Sheet making machine, PET Sheet, PET Plastic sheet production making machine extrusion line

Cutomer’s Key problem by using Double-screw PET Sheet Extrusion line with vacuum degassing 1 Big problem with Vacuum system 2 Final PET Sheet is brittleness 3 Clarity of PET Sheet is bad 4 Output is not stable What we can do for you Normally the PET Bottle flakes or sheet sc... Read More

LIANDA at the Chinaplas 2022 (Both Number 6.1B91)

25.April 2022 -08.April 2022 SHANGHAI International Exhibition Center, China Will show ■ PET/PETG Infrared crystal dryer — 20mins drying, final moisture ≤30ppm ■ PET Recycled pellets crystallization by IRD machine ■ 600 Single shaft shredder Read More

PET Injection Molding processing condition

PET (Polyethylene terephthalate) Drying and Crystallizing before Injection molding processing It must be dried before molding. PET is very sensitive to hydrolysis. The conventional air heating-dryer are 120-165 C (248-329 F) for 4 hours. The moisture content should be less than 0.02%. Adopt ... Read More

Infrared (IR) Dryer for the corn

For safe storage, the moisture content (MC) in the normally harvested corn is higher than the required level of 12% to 14% wet basis (w.b.). In order to reduce the MC to a safe storage level, it is necessary to dry the corn. There are several ways to dry corn. Natural air drying in the tank occur... Read More

How Infrared dryer cooperate with the parallel Twin-screw extrusion line with degassing system?

Infrared drying can significantly improve the performance of a twin-screw extruder because it reduces the degradation of IV value and significantly improves the stability of the entire process. First , the PET regrind will be crystallized and dried in about 15-20 minutes inside the IRD. This crys... Read More

The extruder with Double vacuum station enough to dry the flakes in the process, then no need pre-drying?

In recent years, there are multi-screw extruder system have been established in the market as an alternative to Single – screw extruders with a pre-drying system. (Here we call multi-screw extrudering system including Twin-screw extruders, Planetary roller extruders etc.) But we think it is neces... Read More

 The Energy-saving Packaging Solution—Drying, Crystallizing PLA

Virgin PLA resin, is crystallized and dried to 400-ppm moisture level prior to leaving the production plant. PLA picks up ambient moisture very rapidly, it can absorb around 2000 ppm moisture at open room condition and most of the problems experienced on PLA arise from inadequate drying. PLA is r... Read More

Waste plastic granulator production line

Read More

Common faults and maintenance methods of plastic granulator

The machine will inevitably have faults during use and need maintenance. The following describes the common faults and maintenance of the plastic granulator. 1、 The unstable current of the server causes uneven feeding, damage to the rolling bearing of the main motor, poor lubrication or no heati... Read More

Why does China Import plastic waste from abroad every year?

In the scene of the documentary film “plastic Empire”, on the one hand, there are mountains of plastic waste in China; On the other hand, Chinese businessmen are constantly importing waste plastics. Why import waste plastics from overseas? Why is the “white garbage” that C... Read More